Phase-change memory materials are promising for the next generation of non-volatile flash memory that will serve in new mobile computing entertainment and other handheld electronics. Among them are chalcogenide glasses Ge-Sb-Te (GST) which can exist in two separate structural states - amorphous and crystalline. Switching of the material from one to another state can be done by heating applying an electrical pulse or by exposure to intense laser beam. In the present work we report the changes of optical parameters of amorphous Ge 1 Sb 2 Te 4, Ge 1 Sb 4 Te 7, and Ge 2 Sb 2 Te 5 thin films under heat treatment and light exposure. The illumination with white during 1 hour does not change the transmission spectra of the as-deposited amorphous film. The spot of phase change transformation of the amorphous material was observed when the film was illuminated with UV laser pulses. From the transmission spectra T=f(λ) the optical constants (Absorption coefficient α, optical band gap E g, refractive index n, the average electronic energy gap E0 and the dielectric oscillator strength E d were calculated. For Ge 1 Sb 2 Te 4 the value of E 0 is smaller than optical band gap E g =1.08 eV obtained from the Tauc plot. Large values of the refractive index n are obtained for smaller E 0 =0.931 eV and for large E d =7.448 eV. The anealing of the amorphous Ge 2 Sb 2 Te 5 thin film at T=100 o C during t=4 min shifts the transmission spectra in the low frequency region. The anealing at higher temperatures makes the thin film non-transparent, e.g. take place the process of crystalization.