| Articolul precedent |
| Articolul urmator |
 |
 562 1 |
| Ultima descărcare din IBN: 2020-01-20 13:02 |
 SM ISO690:2012SMYSLOV, Vladimir, YAKUNIN, Vladimir, BELOTSERKOVSKII, Igori, YAKUNIN, Anton. Electronic hydrostatic transducer with digital output. In: Nanotechnologies and Biomedical Engineering, Ed. 1, 7-8 iulie 2011, Chișinău. Technical University of Moldova, 2011, Editia 1, pp. 218-220. ISBN 978-9975-66-239-0.. |
| EXPORT metadate: Google Scholar Crossref CERIF DataCite Dublin Core |
| Nanotechnologies and Biomedical Engineering Editia 1, 2011 |
|
|
Conferința "International Conference on Nanotechnologies and Biomedical Engineering" 1, Chișinău, Moldova, 7-8 iulie 2011 | |
|
|
| Pag. 218-220 | |
 Descarcă PDF |
|
| Rezumat | |
The TPH-485-0,06 submersible level transducer of hydrostatic pressure is a general-purpose sensor for measuring the level of fresh water or other mildly corrosive liquids. The TPH-485-0,06 submersible level transducer can be used to measure the water level in reservoirs, lakes, open flow channels, and weirs as well as the groundwater level of boreholes. Relatively low water levels can be measured using the TPH-485-0,06 submersible level transducer despite its diameter of 24 mm. This is possible by incorporating a highly sensitive miniature silicon diaphragm with a very thin isolation membrane back filled with silicone oil. |
|
| Cuvinte-cheie hydrostatic pressure transducer, groundwater level of boreholes, RS-485 interface |
|
|
|
|
|
