Conţinutul numărului revistei |
Articolul precedent |
Articolul urmator |
505 0 |
SM ISO690:2012 WANG, Kun. Electrochemical Micromachining Using Vibratile Tungsten Wire for High-Aspect-Ratio Microstructures. In: Электронная обработка материалов, 2010, nr. 5(46), pp. 5-10. ISSN 0013-5739. |
EXPORT metadate: Google Scholar Crossref CERIF DataCite Dublin Core |
Электронная обработка материалов | ||||||
Numărul 5(46) / 2010 / ISSN 0013-5739 /ISSNe 2345-1718 | ||||||
|
||||||
Pag. 5-10 | ||||||
|
||||||
Descarcă PDF | ||||||
Rezumat | ||||||
Electrochemical micromachining can remove electrically conductive materials with the transferring of ions, so that high precision is achievable. A novel method for fabricating high-aspect-ratio microstructures by electrochemical micromachining using vibratile tungsten wire was proposed in this paper. The slight vibration of tungsten wire can improve the machining stability. The relations between the machining accuracy and machining parameters were experimentally studied. Micro groove with the width of 15μm was machined, and micro sharp-angles structure with aspect ratio of 10 was obtained experimentally. |
||||||
|