Estimation of parameters of a received signal in a single-frecquency network DVB-T2
Închide
Articolul precedent
Articolul urmator
221 2
Ultima descărcare din IBN:
2020-05-28 19:45
SM ISO690:2012
IACOB, Mihail; DEMCIUC, Yu. I.; AVRAM, Ion. Estimation of parameters of a received signal in a single-frecquency network DVB-T2. In: Electronics, Communications and Computing. Editia a 10-a, 23-26 octombrie 2019, Chişinău. Chișinău, Republica Moldova: 2019, p. 82. ISBN 978-9975-108-84-3.
EXPORT metadate:
Google Scholar
Crossref
CERIF

DataCite
Dublin Core
Electronics, Communications and Computing
Editia a 10-a, 2019
Conferința "Electronics, Communications and Computing"
Chişinău, Moldova, 23-26 octombrie 2019

Estimation of parameters of a received signal in a single-frecquency network DVB-T2


Pag. 82-82

Iacob Mihail1, Demciuc Yu. I.1, Avram Ion2
 
1 State Enterprise «Radiocomunicatii»,
2 Technical University of Moldova
 
Disponibil în IBN: 8 noiembrie 2019


Rezumat

The second-generation digital terrestrial television broadcasting system DVB-T2 [1] provides greater flexibility and spectral efficiency of the system compared to its predecessor DVB-T, and is most focused on the deployment of single-frequency networks SFN (Single Frequency Network) [2]. Important advantages of the SFN cluster are such as efficient use of the allocated radio frequency spectrum, the ability to receive a signal from an alternative direction, reducing the area of shadow zones, etc. However, in the service area of the SFN cluster, mutual interference of the signals transmitted in the combined frequency channel of the group of transmitters occurs. The aim of this study is to evaluate the effect of frequency selective fading of the total signal at the input of the DVBT2 receiver on the quality of the received  signal. This article provides a brief description of the architectural model of the SFN DVB-T2 cluster [1,3,4,5]. In the practical part of the study, an assessment was made of the quality indicators of the received signal in a SFN DVB-T2. In order to fulfill the research task, in laboratory conditions, was mounted a circuit simulating the operation of the SFN cluster. Applying two signals simultaneously to the input of the measuring device made it possible to identify how the qualitative parameters of the DVB-T2 received signal change, depending on the difference in levels and time delays of the signal at the input of the measuring device. As a result of the analysis of the obtained measurement results [6], conclusions are drawn regarding methods for assessing the quality of the received signal in single-frequency digital terrestrial broadcasting networks.

Cuvinte-cheie
Service zone, DVB-T2, SISO, SFN, MER, СBER, LBER, T2 Gateway, Guard Interval, T2-MI interface