Technology of Dimensional Laser Processing of Intractable Materials
Închide
Conţinutul numărului revistei
Articolul precedent
Articolul urmator
692 4
Ultima descărcare din IBN:
2017-10-10 10:22
SM ISO690:2012
ANYAKIN, Nicolai, NAYEBI, M, KOVALENKO, V., KREMENITSKII, V.V., ZHUK, R.O., STEPURA, A., KONDRASHEV, P.V.. Technology of Dimensional Laser Processing of Intractable Materials. In: Surface Engineering and Applied Electrochemistry, 2014, nr. 1(50), pp. 1-8. ISSN 1068-3755. DOI: https://doi.org/10.3103/S1068375514010025
EXPORT metadate:
Google Scholar
Crossref
CERIF

DataCite
Dublin Core
Surface Engineering and Applied Electrochemistry
Numărul 1(50) / 2014 / ISSN 1068-3755 /ISSNe 1934-8002

Technology of Dimensional Laser Processing of Intractable Materials
DOI: https://doi.org/10.3103/S1068375514010025

Pag. 1-8

Anyakin Nicolai1, Nayebi M1, Kovalenko V.1, Kremenitskii V.V.2, Zhuk R.O.1, Stepura A.1, Kondrashev P.V.1
 
1 National Technical University of Ukraine "Igor Sikorsky Kyiv Polytechnic Institute",
2 National Academy of Science of Ukraine
 
Disponibil în IBN: 4 iunie 2015


Rezumat

The technological process of laser milling using the Q-switched mode is studied in this work. It is shown that the results of the laser action (the roughness of the surface and its chemical composition, the thickness of the removed layer) considerably depend on the processing conditions and the thermal and physical properties of the workpiece. The quality is also influenced by the amount of the liquid phase appearing in the case of laser heating and the fracture mode.

Cuvinte-cheie
laser technology,

laser dimensional processing, laser milling, intractable materials