Electrochemical investigation on the corrosion of 18%Ni M250 grade maraging steel under welded condition in sulfuric acid medium
Închide
Conţinutul numărului revistei
Articolul precedent
Articolul urmator
755 0
SM ISO690:2012
KUMAR, Pradeep, NITYANANDASHETTY, A.. Electrochemical investigation on the corrosion of 18%Ni M250 grade maraging steel under welded condition in sulfuric acid medium. In: Surface Engineering and Applied Electrochemistry, 2013, nr. 3(49), pp. 76-83. ISSN 1068-3755.
EXPORT metadate:
Google Scholar
Crossref
CERIF

DataCite
Dublin Core
Surface Engineering and Applied Electrochemistry
Numărul 3(49) / 2013 / ISSN 1068-3755 /ISSNe 1934-8002

Electrochemical investigation on the corrosion of 18%Ni M250 grade maraging steel under welded condition in sulfuric acid medium

Pag. 76-83

Kumar Pradeep, NityanandaShetty A.
 
National Institute of Technology Karnataka
 
 
Disponibil în IBN: 27 februarie 2014


Rezumat

The corrosion behavior of welded maraging steel in sulfuric acid solutions has been studied over a range of acid concentrations and solution temperatures by electrochemical techniques such as Tafel extrapolation and electrochemical impedance spectroscopy. The studies have revealed that the corrosion rate of welded maraging steel increases with the increase in temperature and increase in concentration of sulfuric acid in the medium. The thermodynamic parameters such as activation energy, enthalpy of activation and entropy of activation for the corrosion process are calculated. The results obtained through the two techniques are in good agreement. The surface morphology and surface composition of the corroded samples have been examined by scanning electron microscopy (SEM) and energy-dispersive X-ray (EDX) analysis, respectively.

Коррозийное поведение сварной мартенситностареющей стали в растворах серной кислоты было изучено при различных концентрациях кислоты и температурах раствора с помощью таких электрохимических методов, как экстраполяция Тафеля и электрохимический импеданс спектроскопии. Исследование показало, что скорость коррозии сварной мартенситностареющей стали возрастает с увеличением температуры и концентрации серной кислоты в среде. Были рассчитаны такие термо- динамические параметры, как активирующая энергия, энтальпия активации и энтропия активации для коррозионных процессов. Результаты, полученные при применении обоих методов, находятся в хорошем согласии. Морфология и состав поверхности корродированных образцов были изучены с помощью сканирующей электронной микроскопии (SEM) и энергодисперсионным рентгеновским анализом (EDX).

Cuvinte-cheie
maraging steel, EIS, EDX.,

polarization, SEM