Design of highly active electrodes for hydrogen evolution reaction based on mo-rich alloys electrodeposited from ammonium acetate bath
Close
Conţinutul numărului revistei
Articolul precedent
Articolul urmator
764 1
Ultima descărcare din IBN:
2023-09-13 16:08
SM ISO690:2012
VERNICKAITE, E., BERSIROVA, Oksana, CESIULIS, Henrikas, TSYNTSARU, Natalia. Design of highly active electrodes for hydrogen evolution reaction based on mo-rich alloys electrodeposited from ammonium acetate bath. In: Coatings, 2019, vol. 9, p. 0. ISSN 2079-6412. DOI: https://doi.org/10.3390/COATINGS9020085
EXPORT metadate:
Google Scholar
Crossref
CERIF

DataCite
Dublin Core
Coatings
Volumul 9 / 2019 / ISSN 2079-6412

Design of highly active electrodes for hydrogen evolution reaction based on mo-rich alloys electrodeposited from ammonium acetate bath

DOI: https://doi.org/10.3390/COATINGS9020085

Pag. 0-0

Vernickaite E.1, Bersirova Oksana2, Cesiulis Henrikas1, Tsyntsaru Natalia31
 
1 Vilnius University,
2 Vernadsky Institute of General and Inorganic Chemistry NAS Ukraine ,
3 Institute of Applied Physics
 
Disponibil în IBN: 7 octombrie 2019


Rezumat

The given research was driven by prospects to design Mo-rich coatings with iron group metals electrodeposited from a highly saturated ammonium acetate bath. The obtained coatings could be employed as prominent electrodes for the hydrogen evolution reaction (HER). It was found that the Mo content in Ni-Mo alloys can be tuned from 30 to 78 at.% by decreasing the molar ratio [Ni(II)]:[Mo(VI)] in the electrolyte from 1.0 to 0.25 and increasing the cathodic current density from 30 to 100 mA/cm2. However, dense cracks and pits are formed due to hydrogen evolution at high current densities and that diminishes the catalytic activity of the coating for HER. Accordingly, smoother and crack-free Ni-54 at.% Mo, Co-52 at.% Mo and Fe-54 at.% Mo alloys have been prepared at 30 mA/cm2. Their catalytic behavior for HER has been investigated in a 30 wt.% NaOH solution at temperatures ranging from 25 to 65 °C. A significant improvement of electrocatalytic activity with increasing bath temperature was noticed. The results showed that the sequence of electrocatalytic activity in alkaline media decreases in the following order: Co-52 at.% Mo > Ni-54 at.% Mo > Fe-54 at.% Mo. These peculiarities might be linked with different catalytic behavior of formed intermetallics (and active sites) in electrodeposited alloys. The designed electrodeposited Mo-rich alloys have a higher catalytic activity than Mo and Pt cast metals.

Cuvinte-cheie
Co-Mo, Electrocatalysis, Electrodeposition, Fe-Mo alloys, Hydrogen evolution reaction, Ni-Mo

BibTeX Export